XtraBond®1500NS – Non Skinning Premium Grade Butyl Sealant

XtraBond®1500NS is a single component, non-skinning butyl- based solvent release sealant. The product is designed to deliver excellent adhesion to panels and roofing materials – while remaining permanently pliable.

XtraBond®1500NS is non-staining. The product is the ideal choice in applications where the combination of moisture and cold temperatures would cause the break-down of other sealants. It is also an excellent solution when it will be exposed to both high and low temperatures.

Permanently Pliable
Moisture Resistant
Non-Paintable
Non-Skinning
Non-Staining

Categories: Butyl Rubber, Cold Storage

Applications

This Product is engineered for many Applications, including:

Insulated Metal Panels
Walk-In Cooler/Freezer
Acoustical
Industrial

Industries

Industries Served

This product is designed, engineered and manufactured for the following industries:

Properties

Physical Properties

Item	Test Method	Properties
Skin Time	Internal Method	Permanently Tacky
Tack Free Time	Internal Method	Permanently Tacky
Cure Rate	Internal Method	Permanently Tacky
VOC	EPA Method 24	< 150 g/L, less water and exempt solvents
Staining	ASTM D2203	None
Sag/Slump	ASTM D2202	Minimal; < 0.2"
UV Resistance	ASTM G154	No discoloration or change in appearance after 2500 hours
Service Temperature	Internal Method	-40 - 200°F

Colors

Available Colors

This product is available in the following colors:

White
Aluminum

Special colors upon request.

Directions & Storage

Surface Preparations

The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to applications.

Directions

For best results, prepare clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with mineral spirits or similar solvent.