XtraBond®2500 – Co-Polymer Sealant & Adhesive

XtraBond®2500 – Co-Polymer Sealant & Adhesive

XtraBond®2500 is a single component, permanently flexible, high performance adhesive/sealant designed from cutting-edge co-polymers. The product is engineered to deliver excellent adhesion and performance with a wide variety of roofing substrates, tile, concrete, clay, slate, pre-painted metals, masonry, stone, aluminum, and sheet metal – without the need of a primer.

XtraBond®2500 advanced ultra-clear chemistry provides a highly durable bond that will not crack, and is ideal for applications that are exposed to high winds. The product cures quickly and provides a smooth, paintable surface.

Reduces Tile Chatter & Shifting
Approved for High Wind Areas
Excellent Adhesion
Paintable

Category: Co-Polymer

Applications

This Product is engineered for many Applications, including:

Gutter & Sheet Metal
Siding & Trim
Industrial
Roofing

Industries

Industries Served

This product is designed, engineered and manufactured for the following industries:

Properties

Physical Properties

Item	Test Method	Properties
Skin Time	Internal Method	< 30 minutes @ 70°F / 50% RH
Tack Free Time	Internal Method	< 30 minutes @ 70°F / 50% RH
Cure Rate	Internal Method	1/4" Bead in 14 days
VOC	EPA Method 24	< 315 g/L, less water and exempt solvents
Shore A	ASTM C661	50 +/- 5
Tensile Strength	ASTM D412	300 - 350 psi
Staining	ASTM D2203	None
Sag/Slump	ASTM D2202	Minimal; < 0.2"
UV Rating	ASTM G154	No discoloration or change in appearance after 500 hours

Specs

Specifications

XtraBond®2500 meets or exceeds the requirements of:

Federal Specification TT-S-00230C, Type II, Class B
ASTM C920 Type S, Grade NS, Class 12.5, Use NT, M, A & O.

Colors

Available Colors

This product is available in the following colors:

Ultra Clear

Packaging

Packaging Options

This product is available in the following packaging options:

10.1 FL OZ Cartridges
Plastic Pails (1-5gal Variation)
55gal Drums

Directions & Storage

Surface Preparations

The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to applications.

Directions

For best results, prepare clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with mineral spirits or similar solvent.

Storage

Material is to be stored under controlled dry environment (below 75° F). Use within 12 months from date of manufacture.